Adding phones with bat, Adding phones with bat” section on – Cisco OL-11953-01 User Manual

Page 17

Advertising
background image

2-17

Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0

OL-11953-01

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones to the Cisco Unified Communications Manager Database

Adding Phones with Cisco Unified Communications Manager
Administration

You can add phones individually to the Cisco Unified Communications Manager
database using Cisco Unified Communications Manager Administration. To do
so, you first need to obtain the MAC address for each phone.

For information about determining a MAC address, see the

“Determining the

MAC Address for a Cisco Unified IP Phone” section on page 2-20

.

After you have collected MAC addresses, in Cisco Unified Communications
Manager Administration, choose Device > Phone and click Add New to begin.

For complete instructions and conceptual information about Cisco Unified
Communications Manager, refer to Cisco Unified Communications Manager
Administration Guide
and to Cisco Unified Communications Manager System
Guide
.

Related Topics

Adding Phones with Auto-Registration, page 2-14

Adding Phones with Auto-Registration and TAPS, page 2-15

Adding Phones with BAT, page 2-17

Adding Phones with BAT

The Cisco Bulk Administration Tool (BAT) is a plug-in application for
Cisco Unified Communications Manager that enables you to perform batch
operations, including registration, on multiple phones.

To add phones using BAT only (not in conjunction with TAPS), you first need to
obtain the appropriate MAC address for each phone.

For information about determining a MAC address, see the

“Determining the

MAC Address for a Cisco Unified IP Phone” section on page 2-20

.

Related Topics

Adding Phones with Auto-Registration, page 2-14

Adding Phones with Auto-Registration and TAPS, page 2-15

Advertising