Dell PowerEdge M805 - Manual (Page 13)

PT1016 Pass-Through Module Quick Start Guide Page 13
and User Manual
4. Install Drivers
There are no drivers, fimware or boot code for this device. Utility
software, if applicable, will be located in the Support section of the
Emulex website (www.emulex.com).
5. Having Problems?
Notwithstanding language to the contrary in any other Dell
documentation or on any Dell website, the limited warranty applicable
to Dell branded products described in the Product Information Guide
and/or on the local country Dell website shall apply to the PT1016
Pass-Through Module.
6. Laser Safety
Install only CDRH Certified Class 1 Laser Devices.
Table 2. Pass-Through Module Status LEDs
Yellow LED Blue LED State
Off Off The pass-through module is
powered off or an error condi-
tion exists
Off On The switch is healthy
On Off Switch fault
On Off Booting up
Off Fast blink Chassis Management Con-
troller identifies pass-through
module
Fast blink Off Misconfiguration on link
PT1016PassThruModuleQSG.book Page 13 Monday, October 15, 2007 3:02 PM