Dell PowerVault DP500 - Manual (Page 19)

Configuring Virtual Disks for DPM
19
Figure 4-4. Virtual Disk Created
In Figure 4-4 above, the new virtual disk you added (Virtual Disk 2) is shown
as ready.
Adding Available/Free Disks to DPM Storage
Pool
To use additional virtual disks created in the previous steps, they must be
added to DPM’s storage pool. Virtual disks are added to DPM’s storage pool
using the DPM Administrator console. Refer to the help within the DPM
Administrator console or the “Adding Disks to the Storage Pool” section of
Deploying System Center Data Protection Manager 2007.
NOTE:
The DPM Administrator console refers to raw disks and virtual disks simply
as “Disks.”