Dell PowerEdge 6850 - Manual (Page 3)

www
.dell.com | support.dell.com
Figure 2. DRAC 4/P Video and NIC Connector Locations
10 Configure the DRAC 4/P card:
a During boot, the DRAC 4/P <Ctrl><d> setup program option appears. Press
<Ctrl><d> and enter the DRAC 4/P setup program.
b Configure the DRAC 4/P as explained in the Dell Remote Access Controller 4 User’s Guide.
c Exit the DRAC 4/P setup program. The system then continues its boot.
If you are running a Microsoft
®
Windows
®
operating system, the operating system detects
several new DRAC 4/P-related devices as it starts. The drivers for those devices are located in
one of the following paths under the Systems Management group on the Dell OpenManage
Server Assistant CD:
Dell: Remote Access Controller - DRAC 4/P (Driver) Windows 2003 DRAC4 Drivers
(Self Extracting Zip) or
Dell: Remote Access Controller - DRAC 4/P (Driver) Windows 2000 DRAC4 Drivers
(Self Extracting Zip)
NOTE:
The screen may blink several times as Windows starts and the Hardware Wizard discovers
the new DRAC 4/P display adapter.
NOTE:
Novell
®
NetWare
®
and Red Hat
®
Linux operating systems use native drivers.
card video connector
card NIC connector