Canon IMAGERUNNER 1670F - Manual (Page 93)

Cleaning the Rollers Inside the Main Unit
If the rollers inside the main unit are dirty, the copy quality will deteriorate. In this
case, you can clean the rollers using the <ADJUST/CLEAN> setting from the
<ADDITIONAL FUNCTIONS> menu.
While the In Use/Memory indicator is lit, the machine does not clean the roller even
if you perform the procedure below (imageRUNNER 1670F model only).
1
Press [Additional Functions].
2
Press [4 ] or [ e] to select <ADJUST/CLEAN>
➞ press [Set].
3
Press [4 ] or [ e] to select <ROLLER CLEANING>.
4
Set letter size paper in the stack bypass.
You must use a plain sheet of letter size paper.
5
Press [Set].
The machine begins cleaning the rollers.
It takes about three minutes to clean the roller.
Set
ADJUST/CLEAN
1.ROLLER CLEANING
Set
Additional Functions
5-16 Routine Cleaning
5
Routine Maintenance
NOTE
NOTE
IMPORTANT
**RG_Chap 05 3/4/04 7:45 PM Page 16