Casablanca Fan Company CASABLANCA Wilderness CEILING FAN 86UxxM User Manual

Page 4

Advertising
background image

4

Installing a New Ceiling Fixture Outlet Box

If you do not have an existing fixture located where you wish

to place your Casablanca fan, an approved ceiling fixture

outlet box must be installed and wired.

Using Existing Ceiling Fixture Outlet Box

After turning the power OFF at its source (either circuit

breaker or fuse box), lower the old fixture and disconnect

the wiring. Check the ceiling fixture outlet box to be sure

that it is marked ‘Approved for ceiling fan mounting’. If it is

not, a new box must be installed.

warning: to reduce the risk of fire, electrical shock,

or personal injury, mount to outlet box marked ac-

ceptable for ceiling fan support using the mounting

hardware provided with the outlet box.

JOIST

CEILINg

wIRINg

CROSSBAR

mOUNTINg

BRACKET

FLAT

wASHER

gREEN

gROUND

wIRE

CEILINg FAN

APPROVED

wIRINg BOX

RIDgE

SIDE

DOwN

APPROVED

OUTLET BOX

HARDwARE

note: After removing the old fixture, check the outlet box

to insure that it is supported by a joist or beam across its

upper surface. If not, a 2” x 4” stud must be installed.

Step 1. Remove the knockout plug in the center of the out-

let box or drill a

1

/

2

″ hole for the lag screw to pass through.

Then drill a

1

/

4

″ guide hole into the joist or beam to a depth

of 3″.

Step 2. Route the outlet box wires through the keyhole slot of

the crossbar mounting bracket as shown. Attach the crossbar

mounting bracket to outlet box with screws provided, assuring

that the outlet box wires are not pinched by the washer.

CAUTION: To reduce the risk of personal injury,

use only the mounting hardware provided with

the approved outlet box to install the crossbar

mounting bracket.

wIRE NUT (4)

additional hardware

LAg SCREw

3

/

8

” #7 X 5” (1)

wARNINg!

SUPPORT DIRECTLY TO

BUILDINg STRUCTURE ONLY.

1” x 8-32 ROUNDED

HEAD SCREw (2)

FLAT wASHER (2)

2

1

/

4

” x 8-32 ROUNDED

HEAD SCREw (2)

GETTING STARTED

CEILING HARDWARE & SUPPORT INSTALLATION PARTS

CROSSBAR MOUNTING BRACKET INSTALLATION

CROSSBAR mOUNT-

INg BRACKET

Advertising