Canon DR-7090C - Manual (Page 16)

8
2.
Features
The main features of the DR-7090C are described below.
Scanner Features
● High-speed scanning
The feeder supports scanning of LTR/A4-size
documents at speeds up to 70 pages per minute.
● Single-pass duplex (two-side) scanning
When scanning two-sided documents with the feeder,
the front and back sides of the document are scanned
simultaneously.
When the Long Document mode is set to ON in the user
mode settings, two-sided documents are scanned one
side at a time.
● Flatbed scanning
Flatbed scanning is also supported for thin paper, paper
that does not feed properly, magazines, bound
documents, and other documents that cannot be scanned
using the feeder.
● Feeding capacity of up to 100 pages
The paper feed tray allows you to load up to 100 sheets
of standard copy paper at one time.
● Variety of Scanning Modes
The scanner is equipped with six scanning modes:
Black and White, Error Diffusion, Advanced Text
Enhancement, Advanced Text Enhancement II, 256-
Color Grayscale, and 24-Bit Color.
* Advanced Text Enhancement can clarify scanned text by
processing background or foreground colors.
● Count-Only Mode
When operating the scanner as a stand-alone device,
this mode counts the number of loaded document
sheets.
● Long Document Mode
Document sheets up to 24.8" (630 mm) long can be
scanned with Paper Size Detection.
● Job Function
Scanning conditions and the saving destination for
image files are registered with the job, so you can scan
using only control panel key operations. (See “About
the Job Function” on p. 25.)
● User Mode
The User Mode functions can be employed to set the
scanner for practically any condition. For details on the
User Mode settings, refer to the User Manual.