Citizen Systems CBM-290 - Manual (Page 42)

CITIZEN 42
(34) Selecting the font of HRI code (GS f n)
Code : [1D]h + [66]h + N
* n = 0, 1
Selecting the font of HRI code in printing bar code.
The type of font can be printed by selecting n is as follows.
n Font
0 Font A
1 Font B
(35) Defining Download Bit Image (GS * n1 n2 Dn)
Code : [1D]h + [2A]h + n1 + n2 Dn
* {1
≤
n1
≤
FF}
{1
≤
n2
≤
48}
{n1 X n2
≤
1311} Data is described in Hex code.
Defines downloading bit images of the number of dots specified by n1/n2.
l The numbers of dots are n1 x 8 in horizontal direction and n2 x 8 in vertical direction.
l Dn indicates bit image data.
l The download bit image thus defined remains effective until redefinition, ESC @
execution, ESC &, or power OFF takes place.
l A download character and a download bit image cannot be defined simultaneously.
With this command executed, defined content of a download character is cleared.
l Relations between the bit image data and the dot defined are shown below: