Dell PowerEdge C5125 - Manual (Page 14)

12
Installation and Configuration
Connecting the Power Cables
1 On the back of the system, connect the mains power cable to the system’s
power socket.
2 Plug the other end of the power cables into a grounded electrical outlet or
a separate power source such as an uninterrupted power supply or a power
distribution unit.
Turning On the System
When connected to a power source the system automatically powers on.
See the Using the Baseboard Management Controller Guide at
support.dell.com/manuals.
NOTE:
AC Port 1 provides power to PSU1, ACP Port 2 provides power to PSU2. See
Populate the System step 3 for further information.
AC Port 2
AC Port 1