Canon CR-80 - Manual (Page 15)

15
3
Windows recognizes the CR-50/80 as new hardware, and
installation starts automatically.
NOTE
The CR-50/80 will be registered as “CANON CR-50 USB” or
“CANON CR-80 USB” in the Imaging Device directory.
Turning OFF the Power
1
Turn OFF your computer.
2
To turn OFF the scanner, slide the Power Switch to the
left.
CAUTION
• Wait at least 10 seconds before turning the scanner back
ON.
• For your safety, disconnect the power plug from the power
outlet if you are not using the scanner for a long period of
time.
(Windows 7)
(OFF)