Casio AX200 - Manual (Page 77)

www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007 7 7
Link Alive Retry Times
The AX200 and the I-box units send a link alive message to the PC every 5 seconds to confirm
that the communication is stable. If the PC doesn’t receive this message it assumes that the unit
has gone off-line. This option specifies the number times that the PC will attempt to get a link
alive message before the “PC Off-line” transaction appears on the main screen.
Function Settings
Allow Auto Detecting New Devices
Auto detect can be switched off if required.
Allow Auto Download
System and cardholder data is automatically
downloaded to the controller when you close and go
back to the main screen. When switched off, a red icon
will appear on the bottom of the main screen; if a
download is required. In this case downloads have to be done
manually using the Utilities, Download menu.
Enable Special Functions
This feature is mostly used for engineering purposes. It enables the hidden features embedded in
different parts of the software. The default setting is off.
Enable Full Card Matching
This feature allows the use of facility code, site code, card number and issue number. Site code
and issue number are occasionally used by some card manufacturers. The default setting is off.
Auto Email Bug List on Exit
Uses the default e-mail facility on your PC to email the Bug list to the manufacturer
(
[email protected] ) when you attempt to quit the software. The default setting is off.
Calculate Imprint as Card Number
Calculates the imprint as reverse mifare and works out the correct card number.
Disable Broadcast Time Sync
Disables the broadcast of the time synchronization. This feature is used for older firmwares.
LAN/WAN
You can select between the Local Area Network and the Wide Area Network. This option is also
available in the Device Manager • Server Configuration.
COM Port Settings