Dell Vostro A180 (Early 2009) - Manual (Page 22)

System Setup Options — Dell Vostro A180
Advanced BIOS Features
CPU Configuration l Execute-Disable Bit — Disabled; Enabled (Enabled by default)
l Hyper Threading Technology — Disabled; Enabled (Enabled by default)
Quick Boot Allows BIOS to skip certain tests while booting
Disabled; Enabled (Enabled by default)
Boot Up NumLock Off; On (On by default)
Boot Device Configuration
Hard Disk Drives Specifies the boot device priority sequence from available hard drives
Removable Drives Specifies the boot device priority sequence from available removable drives
CD/DVD Drives Specifies the boot device priority sequence from available CD/DVD drives
First Boot Device Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Disk; Disabled (Removable by default)
Second Boot Device Specifies the boot sequence from the available devices
Removable, CD/DVD, Hard Disk, Disabled (Hard Disk by default)
Third Boot Device Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Disk; Disabled (CD/DVD by default)
Boot Other Device Disabled; Enabled (Enabled by default)
Boot Menu Security Disabled; Enabled (Disabled by default)
Advanced Chipset Features
Initiate Graphic Adapter Select which graphics controller to use as the primary boot device
IGD; PCI/IGD (PCI/IGD Slot by default)
DVMT Mode Select Fixed Mode; DVMT Mode; Combo Mode (DVMT Mode by default)
DVMT/FIXED Memory 64 MB; 128 MB; Maximum DVMT (128 MB by default)
Integrated Peripherals
IDE Configuration SATA Controller — Disabled; Compatible; Enhanced (Enhanced by default)
Onboard Configuration l Onboard Audio Controller — Enabled; Disabled (Enabled by default)
l Onboard LAN Controller — Enabled; Disabled (Enabled by default)
l Onboard LAN Boot ROM — Enabled; Disabled (Enabled by default)
SuperIO Configuration Serial Port1 Address — Disabled; 3F8/IRQ4; 2F8/IRQ3; 3E8/IRQ4; 2E8/IRQ3 (Disable by default)
USB Configuration l USB Controller — Enabled; Disabled (Enabled by default)
l USB 2.0 Controller — Enabled; Disabled (Enabled by default)
l Legacy USB support — Enabled; Disabled (Enabled by default)
l USB Storage Device Support — Enabled; Disabled (Enabled by default)
USB Controller Disabled; Enabled (Enabled by default)
Onboard Audio Controller Disabled; Enabled (Enabled by default)
Onboard LAN Controller Disabled; Enabled (Enabled by default)
Power Management Setup
ACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)
Restore on AC Power Loss Power Off; Power On; Last State (Power Off by default)
Resume by LAN Disabled; Enabled (Enabled by default)
Resume by RTC Disabled; Enabled (Enabled by default)
Set Supervisor Password Allows you to set the supervisor password
Set User Password Allows you to set user passwords when the supervisor password has been set
NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.
System Info
BIOS Info Shows the BIOS version number and date information
Service Tag Shows the service tag of the computer
Processor Type Shows the processor type
Processor L2 Cache Shows the processor L2 cache size
Memory Installed Indicates amount of installed memory, available memory, memory speed, channel mode (dual or single), and type of memory
installed