Canon Pixma iP4300 User Manual

Page 37

Advertising
background image

33

Routine Maintenance

5

Install the ink tank.

(1) Insert the front end of the ink tank into the Print

Head.

(2) Press on the

mark on the ink tank until

the ink tank snaps firmly into place.

(3) Make sure that the ink lamp lights up red.

6

Close the Inner Cover.

7

Close the Top Cover.

Important

The printer cannot be used unless all the ink tanks are

installed.

Note

Make sure that the Inner Cover is closed. Printing will

not start with the Inner Cover open since paper can not

be fed properly.

Note

z

If the ALARM lamp still flashes orange after the Top Cover is closed, see “ALARM Lamp

Flashes Orange” on page 76.

z

When you start printing after replacing the ink tank, Print Head Cleaning is performed

automatically. Do not perform any other operations until Print Head Cleaning finishes. The

POWER lamp flashes green during cleaning.

(1)

(2)

(3)

*1

*1 Make sure the position of the

tank matches the label.

Advertising