Cobra Electronics COBRA XRS 930 - Manual (Page 5)

To Turn On the Unit and Adjust the Audio Volume
Rotate the
On-Off/
Volume control
clockwise (away
from you).
Tone Visual Display
Three beeps
h
appears in the display
indicating that the power
is On
Getting Started
Getting Started
•
Your Detector
Nothing Comes Close to a Cobra ®
5
Installation
Your Detector
English 4
1. Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and reattach
the unit as often as you like.
6. Plug the power cord
into the detector.
7. Plug the cigarette lighter
adapter on the power
cord into your vehicle’s
cigarette lighter.
Dashboard Mounting
Power On
X K Ka V S
h
On-Off/
Volume Control
Rotate clockwise
(away from you)
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the
ignition is Off. If this is the case with your vehicle, you should turn Off
or unplug your detector when parking for lengthy periods.
Auxiliary Audio Jack
•
The Auxiliary Audio Jack can be used to connect external speakers in
environments with high ambient noise levels. The internal speaker will
be disconnected. (This uses a mini stereo audio connector.)
Auxiliary
Audio Jack
XRS930_MANL:9492-XRS9330 12/18/09 8:28 AM Page 4