Canon A610 User Manual
Page 117
115
Ap
pen
d
ix
High-Power Flash HF-DC1
This flash is used to supplement the camera’s built-in flash when
the subject is too far away for proper illumination. Use the following
procedures to affix the camera and High-Power Flash to the
supporting bracket.
Please read the instructions accompanying the flash along with this
explanation.
Using an Externally Mounted Flash
(Sold Separately)
z
When shooting in
mode, the High-Power Flash will not
fire.
z
The flash charge time will lengthen as the battery charge
gets weaker. Always set the power/mode switch to [OFF]
when you finish using the flash.
z
Be careful not to touch the flash window or sensor
windows with your fingers while the flash is in use.
z
The flash may fire if another flash is being used in close
proximity.
z
The High-Power Flash may not fire outdoors in daylight or
when there are no reflective items.
z
For continuous shooting, although the flash fires for the
first shot, it does not fire for subsequent shots.
Tripod
Sockets
Bracket
(Comes with the flash)