Dell Precision 690 - Manual (Page 33)

Quick Reference Guide
33
Starting the Dell Diagnostics From the Drivers and Utilities CD
NOTE:
The Drivers and Utilities CD is optional and may not ship with all computers.
1 Insert the Drivers and Utilities CD.
2 Shut down your computer.
When the DELL logo appears, press <F12> immediately.
If you wait too long and the Windows logo appears, continue to wait until you see the Windows
desktop. Then shut down your computer, and try again.
NOTE:
The next steps change the boot sequence for one time only. On the next start-up, the computer boots
according to the devices specified in system setup.
3 When the boot device list appears, highlight Onboard or USB CD-ROM Drive and press <Enter>.
4 Select the Onboard or USB CD-ROM Drive option from the CD boot menu.
5 Select the Boot from CD-ROM option from the menu that appears.
6 Type
1 to start the ResourceCD menu.
7 Select the option to start the Dell Diagnostics and press <Enter>.
8 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed,
select the version appropriate for your computer.
9 When the Dell Diagnostics Main Menu appears, select the test that you want to run.
Before you start testing
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
• Turn on your printer if one is attached.
• Enter system setup, review your computer’s configuration information, and enable all of your
computer’s components and devices, such as connectors.
Beep Codes
Your computer might emit a series of beeps during start-up if the monitor cannot display errors or problems.
This series of beeps, called a beep code, identifies a problem. One possible beep code (code 1-3-1) consists
of one beep, a burst of three beeps, and then one beep. This beep code tells you that the computer
encountered a memory problem.
If your computer beeps during start-up:
1 Write down the beep code on the "Diagnostics Checklist" in your User’s Guide.
2 Run the Dell Diagnostics to identify a more serious cause.
3 Contact Dell for technical assistance.