Canon C50 - Manual (Page 20)

Canon MultiPASS C50 Getting Started ENGLISH
II-3
³ Document feed lever
Set this lever to the left ( ) for automatic document feed, or to the right ( )
for manual document feed.
· RECEIVE MODE button
Use this button to select whether the MultiPASS C50 is set to receive faxes
manually (”MANUAL MODE”), to treat all calls as faxes (”FAX ONLY
MODE”), to use an answering machine to receive all calls (”ANS.
MACHINE MODE”), or to automatically switch between telephone and fax
receiving, depending on the type of call (”Fax/Tel Mode”).
» LCD display
This displays messages and prompts during operation, and displays selections,
text, numbers, and names when registering information.
¿ RESOLUTION button
Press this button to select the resolution the MultiPASS C50 will use for the
document you want to fax, copy, or scan.
´ One-Touch Speed Dial/Special Function buttons
Use these buttons for one-touch speed dialling, entering user information, and
to perform special operations. See pages 2-25 and 2-26 for details on the
special function buttons.
² Numeric buttons
Use these buttons to type numbers and names when entering information, and
to dial fax/telephone numbers that are not registered for automatic dialling.
¶ (REDIAL)/PAUSE button
Press this button to redial the last number that was dialled using the number
buttons, or to enter pauses between digits when dialling fax numbers.
º CODED DIAL button
Press this button (followed by entering a two-digit code with the numeric
buttons) to dial a fax number that you have registered for coded speed
dialling.
¾ (START/COPY) button
Press this button to begin sending, receiving, scanning, or other operations, or
to select functions when registering information.
µ ALARM lamp
This lamp flashes when an error occurs, when the MultiPASS C50 is out of
paper or ink.
¸ (STOP) button
Press this button to cancel sending, receiving, or any other operation.