Char-Broil 7201560 - Manual (Page 3)

Attach leg braces to the outside of one leg assembly using
#10-24x1-3/4” screws and #10-24 flange nuts. Make sure
slotted (oval) hole is toward bottom of leg.
DO NOT FULLY TIGHTEN screws until Step 6 is complete.
2
1
FIRST, GET A HELPER! This unit is heavy and requires a second person for lifting and moving. NEXT, pick a suitable
location to work. Open the carton and slit the corners so that the carton lays flat. This will give you a protective work surface
during assembly.
TO BEGIN ASSEMBLY, build two leg assemblies by sliding the long leg sections into the short leg sections.
Long leg section
Leg brace
Short leg section
Slotted
hole
Leg brace
Do not fully tighten screws
until Step 6 is complete.