Char-Broil 7201560 - Manual (Page 9)

Hole plug
NOTE: Smoker chamber door not pictured for clarity.
First, attach shelf slats to the two outer holes in shelf brackets using
two
#10-24x1” screws and #10-24 flange nuts per slat. DO NOT
FULLY TIGHTEN SCREWS.
Second, fully tighten hex-head bolts on shelf brackets (installed in
previous step).
Third, attach remaining shelf slat to brackets with two #10-24x1”
screws and #10-24 flange nuts. FULLY TIGHTEN ALL SHELF
SLAT SCREWS.
14
13
Attach two outer
shelf slats. Do not
tighten.
1st
Attach inner slat.
Fully tighten all
slat screws.
3rd
Tighten bracket bolts.
2nd
If you have purchased the optional 3” Temperature Gauge,
part number 40003010, remove the attached nut, insert
gauge stem into large hole in cooking chamber door and
attach nut to gauge on inside of door.
DO NOT
OVERTIGHTEN NUT. Make sure text and graphics are
aligned for easy viewing.
If you do not have a temperature gauge, install the chrome
hole plug (provided) into temperature gauge hole in cooking
chamber door.
If you would like to purchase the optional 3” Temperature
Gauge, part number 40003010, call 1-800-241-7548.