Front panel, Replacing the drive panel, Removing the front panel – Dell Dimension 5150/E510 User Manual
Page 32
Advertising
Replacing the Drive Panel
1. Follow the procedures in "
2. Remove the computer cover.
3. If you are installing a replacement drive panel, remove the old
1 sliding plate lever 3 drive panel
2 sliding plate
4 front panel
4. Align the drive panel tabs with the side-door hinges.
5. Rotate the drive panel toward the computer until it snaps into place on the front panel.
Front Panel
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
Removing the Front Panel
Advertising