Canon IXUS 130 - Manual (Page 61)

61
Using the Face Self-Timer
Using the Face Self-Timer
To take a photo that includes the photographer, such as a group photo,
compose the shot, and press the shutter button. The camera will shoot
approximately two seconds after you enter the shot and it detects your face
(p. 84) .
Choose .
● Choose in Steps 1 – 2 on p. 54 , then
press the l button.
● Press the qr buttons to choose , then
press the l button.
Compose the shot and press the
shutter button halfway.
● Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X The lamp will blink and the self-timer
sound will play.
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the shutter button is pressed
fully, the camera will shoot after a person enters the shot and winks.