Dell Vostro V13 (Late 2009) - Manual (Page 3)

System Setup Options
Main
The Main tab lists out the primary hardware features of the computer. The table below defines the function of each option.
Advanced
The Advanced tab allows you to set various boot and DOS-mode functions. The table below defines the function of each option and its default value.
Security
The Security tab displays the security status and allows you to manage the security features of the computer.
Main
System Time Resets the time on the computer's internal clock.
System Date Resets the time on the computer's internal calendar.
Bios Version Display the BIOS revision.
CPU Type Displays the type of processor.
CPU Speed Displays the speed of the processor.
CPU Cache Size Displays the processor cache size.
CPU ID Displays the processor ID.
Product Name Displays the computer model name.
Fixed HDD Displays the model number of the hard drive.
HDD Size Displays the size of the hard drive.
System Memory Displays the total computer memory.
Extended Memory Displays the total extended memory.
Memory speed Displays the memory speed.
AC Adapter Type Displays the type of the AC adapter.
Advanced
Boot-time Diagnostic Screen
Enable or disable the system information from
being displayed on the screen during power-on self
test (POST)
Default: Disabled
QuickBoot Mode
Allows the System Setup to skip certain tests
during POST which decreases the amount of time
needed to boot the computer.
Default: Enabled
Intel® SpeedStep™ Technology
Allows the clock speed of the processor to be
dynamically changed by software while minimizing
power draw and heat dissipation.
Default: Enabled
No-Execute Mode Memory
Protection
Allows increased protection against buffer overflow
attacks.
Default: Enabled
Intel® Virtualization
Technology
Allows a platform to run multiple operating systems
and applications in independent partitions, allowing
one computer to function as multiple virtual
computers.
Default: Disabled
Integrated NIC
Enable or disable the power supply to the on–
board NIC
Default: Enabled
WLAN Control Enable or disable the wireless LAN module. Default: Enabled
WWAN Control Enable or disable the wireless WAN module. Default: Enabled
Bluetooth Enable or disable the Bluetooth module. Default: Enabled
USB Outside Ports Enable or disable the the USB ports. Default: Enabled
USB BIOS Legacy Support
Enable or disable the legacy support for the USB
controllers
Default: Enabled
USB Wake Support
Allow USB devices to wake-up the computer from
standby. This feature is enabled only when the
AC adapter is connected.
Default: Enabled
ExpressCard Enable or disable the ExpressCard slot. Default: Enabled
Card Reader Enable or disable the Card Reader slot. Default: Enabled
Wake On LAN
Allows the computer to remotely turned on. This
feature is enabled only when the AC adapter is
connected.
Default: Enabled
SATA Mode Selection
Change the SATA controller mode to either ATA or
AHCI.
Default: AHCI
Camera Control Enable or disable the Camera. Default: Enabled
Microphone Control Enable or disable the Microphone. Default: Enabled
Keyboard Click Enable or disable the keyboard sound. Default: Disabled