Dell PowerVault NX3300 - Manual (Page 2)

Setting Up Your Dell PowerVault Network Attached Storage Solution (continued)
Printed in the U.S.A.
2012 - 06
4
|
Initial Confi guration 5
|
System Confi guration
6
|
Additional Information
The PowerVault NAS Initial Configuration Wizard
runs when you first log on to the PowerVault
NX3300 storage system.
The initial configuration tasks include:
Changing the local administrator default •
password
Selecting the system language
•
Confirming the settings •
The PowerVault NAS Initial Configuration Wizard
also configures NAS specific software. After the
wizard is complete, you are prompted to reboot the
system.
The Server Manager window opens
when the administrator logs on to the
system. Using
Server Manager , you
can perform the following tasks:
Initial system configuration •
Configure networking •
Change the computer name •
Specify the language and regional •
settings
Change the date and time settings
•
Utility Share
Utility share is a Server Message Block (SMB) share preconfi gured on your system. The utility share allows you to view data either locally or remotely.
To access the utility share, type \\D<ServiceTag>\NASUtils\ where <ServiceTag> is the Service Tag number located on the system .
Documentation
For documentation and information updates, see support.dell.com/manuals.
Dell OpenManage Server Administrator
You can monitor your system remotely using Dell Open Manage Server Administrator. To access Server Administrator, connect to the secure port,
1311, of your NAS system.
For example, type: https://D<ServiceTag>:1311 where <ServiceTag> is the Service Tag number located on the system .
© 2012 Dell Inc. All rights reserved.
Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc.