Installing the expansion card – Dell OptiPlex XE2 (Mid 2013) User Manual
Page 13
Installing the Expansion Card
1.
Insert the expansion card into it's connector on the system board and press down until it is securely in place.
NOTE: If your computer has a powered expansion card perform step 2, else move to step 3.
2.
Insert the expansion card into it's connector on the system board and press down until it is securely in place.
Connect the power cable from the card.
3.
Rotate the release tab on the card-retention latch downward.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Local Area Network (WLAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Remove the screws that secure the antenna puck to the computer.
4.
Pull the antenna puck from the computer.
5.
Press the blue tab and lift the latch outwards. Lift and remove the WLAN card from the connector on the system
board.
13