Dell Vostro V131 (Mid 2011) - Manual (Page 35)

Installing The Display Assembly
1. Align the display assembly to the computer base.
2. Tighten the screw to secure the right hinge in place.
3. Tighten the screws to secure the display assembly to the bottom base
chassis.
4. Connect the display cable to the connector on the system board.
5. Route the WLAN and WWAN antenna cables along their routing channels
and connect them to their respective modules.
6. Install the palm rest .
7. Install the hard drive .
8. Install the keyboard .
9. Install the base cover .
10. Install the battery .
11. Follow the procedures in After Working Inside Your Computer .
35