Dell Latitude LM - Manual (Page 3)

Dell Latitude LM Port Replicator 3
3. Open the connector door on the back of the com-
puter. Fold over the docking connector panel
inside the connector door (see Figure 2), and then
close the connector door.
Figure 2. Opening the Docking Connector
Panel
4. Place the computer on the port replicator
platform, with the back of the computer facing
the port replicator’s docking connector (see
Figure 3).
Make sure that the grooves on the bottom of the
computer align properly on the platform rails.
Figure 3. Positioning the Computer on the
Port Replicator
5. Position your fingers on the platform grips, as
shown in Figure 4, and use your thumbs to push
the computer forward until the docking connec-
tors are fully engaged.
Figure 4. Docking the Computer
docking connector panel
connector door
replicator
connector
platform rails
computer