Dell Mobile Projector M115HD - Manual (Page 20)

Using the Control Panel
3
5
2
4
6 7
8
9
1
1 Power Turns the projector on or off. For more
information, see "Turning Your Projector On"
on page 15 and "Turning Your Projector Off"
on page 15.
2 Up / Keystone
adjustment
Press to navigate through the On-Screen
Display (OSD) Menu items.
Press to adjust image distortion caused by
tilting the projector (+/-40 degrees).
3 Right
Adjust
/ Auto Press to navigate through the On-Screen
Display (OSD) Menu items.
Press to synchronize the projector to the
input source.
NOTE: Auto Adjust does not operate if
the on-screen display (OSD) is
displayed.
4 TEMP LED If the TEMP amber indicator is on or blinking,
one of the following problems could be
occurring:
• Internal temperature of the projector is too
high
For more information, see "Troubleshooting
Your Projector" on page 50 and "Guiding
Signals" on page 53.
Using Your Projector 20