Dell PowerVault DR2000v - Manual (Page 5)

5 Setting Up the Dell™ DR Series System on Symantec NetBackup to Use Backup Acceleration | May 2014
1 Install and configure the DR Series system
1. Rack and cable the DR Series system and power it on.
2. Initialize the DR Series system. Refer to the Dell DR Series System Administrator Guide under the following
topics: “iDRAC Connection,” “Logging in and Initializing the DR Series System,” and “Accessing
iDRAC6/iDRAC7 Using RACADM”.
3. Log in to iDRAC using the default address 192.168.0.120, or the IP that is assigned to the iDRAC interface.
Use the user name and password of “root/calvin”.
4. Launch the virtual console.