Figure 11: replacing the outer power supply – Dell PowerEdge Rack Enclosure 2420 User Manual

Page 11

Advertising
background image

Cable Routing Procedures for Dell™ PowerEdge™ R310 & R410 Systems

Page 9

Figure 10: Disconnecting the Inner CMA Attachment Bracket

Figure 11: Replacing the Outer Power Supply

Section 4: Cabling a PowerEdge™ R310 or R410 System Installed in Static
Rails

NOTE: The CMA is compatible with the sliding rails only, not the static rails.

1. Follow the instructions contained in the

Rack Installation Instructions

found in the static rail kit

to install the server into a two-post or four-post rack.

2. Install the hook and loop straps provided in the rail kit through the slots in the rear brackets of

the rails as described in the

Rack Installation Instructions

.

Disconnected inner
CMA bracket

Advertising