Dell KVM 2162DS - Manual (Page 142)

132 xxx | LDAP Feature for the RCS xxx
Login Timeout
In cases where there is a large enough directory tree to cause LDAP
authentication to perform slowly, the Sessions window includes a Login
Timeout function with a default timeout of 30 seconds. The login timeout is
the time from which the user presses the OK button on the Login dialog box
until there is no response from the RCS. The RCS will also use this value to
determine the timeout on a LDAP request for authentication.
To specify the login timeout in the on-board web interface:
1 Click Sessions to open the General Session Settings screen.
2 Specify the number of seconds in the Login Timeout menu.
3 Click Save.
Figure 5.10: OBWI - Login Timeout
NOTE: The Login Timeout is distinct from the User Login Caching feature.
The latter works after a login is completed by caching authorization results for
a period of time, eliminating repeated LDAP communications requests.