Dell Precision M4300 (Mid 2007) - Manual (Page 37)

Back to Contents Page
PC Card Reader
Dell™ Precision™ M4300 Service Manual
1. Follow the procedures in Before You Begin .
2. Remove the hinge cover (see Hinge Cover ).
3. Remove the keyboard (see Keyboard ).
4. Remove the display assembly (see Display Assembly ).
5. Remove the palm rest (see Palm Rest ).
6. Remove the four M2 x 3-mm screws that secure the PC Card reader to the computer base.
7. Use the pull-tab to disconnect the PC Card reader cable connector from the system board.
Back to Contents Page
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1 screws (4) 2 PC Card reader 3 pull-tab