Dell Inspiron 1464 (Early 2010) - Manual (Page 2)

Back to Contents Page
AC Adapter Connector
Dell™ Inspiron™ 1464 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
Removing the AC Adapter Connector
1. Follow the procedures in Before You Begin .
2. Remove the battery (see Removing the Battery ).
3. Remove the optical drive (see Removing the Optical Drive ).
4. Remove the module cover (see Removing the Module Cover ).
5. Remove the power button panel (see Removing the Power Button Panel ).
6. Remove the keyboard (see Removing the Keyboard ).
7. Remove the palm rest (see Removing the Palm Rest ).
8. Disconnect the AC adapter connector cable from the connector on the system board.
9. Remove the screw that secures the AC adapter connector to the computer base.
10. Lift the AC adapter connector out of the computer base.
Replacing the AC Adapter Connector
1. Follow the procedures in Before You Begin .
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery ) before working inside the
computer.
1 AC adapter connector 2 screw
3 AC adapter connector cable