Dell PowerVault MD3260 - Manual (Page 10)

10
The number of Remote Replicas is limited to:
 maximum of 32 per array
N/A   
Table 4. MD-Series Storage Array Rules for Dense, 4U Models Only (MD3260,
MD3260i, MD3660i and MD3660f)
MD3260
series
MD3260i
series
MD3660i
series
MD3660f
series
RULE
6Gbps
SAS
1Gbps
iSCSI
10Gbps
iSCSI
8Gbps
Fibre Channel
Support for up to 180 physical slots with a premium
feature activation.
   
Maximum number of physical disks in a RAID0,
RAID1/10 is 120.
   
Up to two MD3060e series expansion enclosures can
be attached to MD3260/MD3260I/MD3660i/MD3660f
dense storage arrays for a total of 3 MD3x60
enclosures.
   
Support for up to 120 physical slots (system default
configuration).
   
A minimum of 20 SAS or SSD drives are required in
each MD3x60 enclosure (4 in front of each drawer)
   
Default IPv4 settings for the Management Ports on the
MD Series Storage Arrays
NOTE: No default gateway is set.
By default, the management ports on the storage array are set to DHCP. If DHCP fails, the
following IPv4 settings will be used:
Table 5. Default IPv4 Management Port Addresses
Controller IPv4 address Subnet Mask
Controller 0 192.168.128.101 255.255.255.0
Controller 1 192.168.128.102 255.255.255.0