Dell P2714H Monitor - Manual (Page 29)

3. Align two bottom insert pins on cable 4. Once the insertion is done, gently
cover to corresponding holes on the push the cable cover down towards
monitor rear, then gently insert the the monitor, until the rest of insert pins
pins into the small holes provided. click into place.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible base
mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable, flat
table.
2. Remove the stand.
3. Use a screwdriver to remove the four screws securing the plastic
cover.
4. Attach the mounting bracket from the wall mounting kit to the LCD.
5. Mount the LCD on the wall by following the instructions that came
with the wall mounting kit.
NOTE: For use only with UL-listed wall mount bracket with minimum
weight/load bearing capacity of 9 kg.
Setting Up the Monitor

29