Nikon S3100 - Manual (Page 184)

172
Troubleshooting
T
e
ch
n
ical
No
te
s an
d I
n
de
x
The recorded pictures are not
displayed in auto sort mode.
• The desired picture was sorted to a category
other than the category currently displayed.
• Pictures recorded by a camera other than the
COOLPIX S3100 and pictures copied using the
copy option cannot be displayed in auto sort
mode.
• Pictures recorded in internal memory or on
the memory card may not be played back
correctly if overwritten by a computer.
• Up to 999 pictures and movie files can be
added to each category. If the desired
category already contains 999 pictures, new
pictures or movies cannot be added.
86
87, 103
–
87
Nikon Transfer 2 does not start
when camera is connected.
• Camera is off.
• Battery is exhausted.
• USB cable is not properly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information on
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
17
22
123
–
122
126
The PictBridge startup screen is
not displayed when the
camera is connected to a
printer.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed
and it may be impossible to print pictures when
Auto is selected for the Charge by computer
option in the setup menu. Set the
Charge by
computer option to Off and reconnect the
camera to the printer.
150
Pictures to be printed are not
displayed.
• Memory card contains no pictures. Replace
the memory card.
• Remove the memory card to print pictures
from the internal memory.
20
Cannot select paper size with
camera.
Paper size cannot be selected from the camera
in the following situations, even when printing
from a PictBridge-compatible printer:
• The printer does not support the paper size
specified by the camera.
• The printer automatically selects the paper
size.
131,
132
–
Problem Cause/Solution A