Dell Precision M2400 (Mid 2008) - Manual (Page 26)

Intel AMT in DHCP Mode Settings Example
The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer
in DHCP mode.
Intel AMT Configurations Example in DHCP Mode
Intel AMT Configuration Parameters Values
Intel AMT Configuration Select and press <Enter>.
Host Name
Example: IntelAMT
This is the same as the operating system machine name.
TCP/IP
Set the parameters as follows:
Enable Network interface
Enable DHCP Mode
Set a domain name (e.g., amt.intel.com)
Provision Model
Intel AMT 4.0 Mode
Small Business
SOL/IDE-R
Enable SOL
Enable IDE-R
Remote FW Update Enabled
Save and exit MEBx and then boot the computer to the Windows® operating system.
Intel AMT in Static Mode Settings Example