Dell POWERVAULT MD3600I - Manual (Page 214)

By default, only the downloadable files that are compatible with the current storage array configuration are
displayed.
When you select a file in the File Selection area of the dialog, applicable attributes (if any) of the file are displayed
in the File Information area. The attributes indicate the version of the file.
5. If you want to download an NVSRAM file with the firmware:
a) Select Transfer NVSRAM file with RAID controller module firmware.
b) Click Select File.
6. To transfer the files to the RAID controller module without activating them, click Transfer files but don't activate
them (activate later).
7. Click Transfer.
Keep these guidelines in mind:
– If the Transfer button is inactive, ensure that you either select an NVSRAM file or clear the Transfer
NVSRAM file with RAID controller module firmware check box.
– If the file selected is not valid or is not compatible with the current storage array configuration, the File
Selection Error dialog is displayed. Click OK to close it, and choose a compatible firmware or NVSRAM file.
8. In the Confirm Download dialog, click Yes.
The download starts.
9. If you are using the EMW, perform one of these actions:
– Select Tools → Upgrade RAID Controller Module Firmware.
– Select the Setup tab, and click Upgrade RAID Controller Module Firmware.
10. In the Storage array pane, select the storage array for which you want to upgrade the RAID controller module
firmware or the NVSRAM.
You can select more than one storage array.
NOTE: The Details pane shows the details of only one storage array at a time. If you select more than one
storage array in the Storage Array pane, the details of the storage arrays are not shown in the Details pane.
11. Click Firmware in the Download area.
If you select a storage array that cannot be upgraded, the Firmware button is disabled. The Download Firmware
dialog is displayed. The current firmware version and the NVSRAM version of the selected storage arrays appear.
NOTE: If you select the storage arrays with different RAID controller module types that cannot be updated
with the same firmware or NVSRAM file and click Firmware, the Incompatible RAID Controller Modules dialog
is displayed. Click OK to close the dialog and select the storage arrays with similar RAID controller module
types.
12. To locate the directory in which the file to download resides, click Browse in the Select files area.
The Select File dialog is displayed.
13. Select the file to download.
14. Click OK.
15. If you want to download the NVSRAM file with the RAID controller module firmware, select Download NVSRAM file
with firmware in the Select files area.
Any attributes of the firmware file are displayed in the Firmware file information area. The attributes indicate the
version of the firmware file.
Any attributes of the NVSRAM file are displayed in the NVSRAM file information area. The attributes indicate the
version of the NVSRAM file.
16. If you want to download the file and activate the firmware and NVSRAM later, select the Transfer files but don’t
activate them (activate later) check box.
214