Dell Inspiron 5160 - Manual (Page 36)

36
Using CDs, DVDs, and other Multimedia
www
.dell.com | support.dell.com
5 Plug the single-connector end of the audio cable in to the headphone connector on the
computer.
6 Plug the two RCA connectors on the other end of the audio cable in to the audio input
connectors on your TV or other audio device.
7 Turn on the TV and any audio device that you connected (if applicable), and then turn on the
computer.
8 See "Enabling the Display Settings for a TV" on page 36 to ensure that the computer
recognizes and works properly with the TV.
Enabling the Display Settings for a TV
NVIDIA Video-Controller Card
NOTE:
Ensure that you properly connect the TV before you enable the display settings.
1 Click the Start button and click Control Panel.
2 Under or pick a Control Panel icon, click Display.
3 Click the Settings tab and click Advanced.
4 Click the Nvidia GeForce tab.
5 On the left side of the menu, click nView Display Mode.
6 Click Clone to enable the television.
7 Click Apply.
8 Click OK to confirm the settings change.
9 Click Yes to keep the new settings.
10 Click OK.