Dell Latitude E5520 (Early 2011) - Manual (Page 50)

Installing the ExpressCard/Smart Card/PCMCIA Module
1. Attach the connector on the back of the ExpressCard/Smart Card/PCMCIA module to the marking on the connector
on the system board.
2. Tighten the screws to secure the ExpressCard/Smart Card/PCMCIA module.
3. Replace the palm rest .
4. Replace the CPU door .
5. Replace the keyboard trim .
6. Replace the keyboard .
7. Replace the optical drive .
8. Replace the back panel .
9. Replace the battery .
10. Follow the procedures in After Working Inside Your Computer .
Related Links
Removing the ExpressCard/Smart Card/PCMCIA Module
50