Dell UPS 1920R - Manual (Page 9)

9 Software Installation on Hyper-V Server 2008 |
Software Installation on Hyper-V Server 2008
This chapter provides the procedures for installing the Dell UPS Management Software on a computer
that is running Microsoft Hyper-V Server 2008.
Instructions are also provided for starting the software and modifying settings in the Hyper-V Server
2008 environment.
Installing the Software
To install the software on the Hyper-V Server:
NOTE: You can start the installation from the CD (F618R A04 or higher) provided with the UPS, or you can
download the software from the Dell Web site (support.dell.com).
1 To install the software from the CD, continue to Step 2. To install the software from the Console
window proceed to Step 5.
2 Run setup.exe from the CD drive: \Windows directory.
The installation interface window opens (see Figure 5).
3 Click next to complete the installation.
4 Proceed to Step 7.
3