Setting up your monitor, Setting up the monitor, Attaching the stand – Dell U2713HM Monitor User Manual
Page 22
Advertising
Setting Up the Monitor
Dell™ U2713HM Flat Panel Monitor User's Guide
Attaching the Soundbar AX510 / AX510PA (Optional)
Attaching the Stand
NOTE:
The stand is detached when the monitor is shipped from the factory.
NOTE:
This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.
3. Press the stand till it snaps into its place.
Advertising