Replacing the system board – Dell Inspiron 1764 (Early 2010) User Manual
Page 52
18.
Remove the seven screws that secure the system board to the computer base.
19.
Carefully ease the connectors out of the slots in the computer, and lift the system board out of the computer base.
20.
Turn the system board over.
21.
Remove the processor heat sink (see
Removing the Processor Heat Sink
).
22.
Remove the processor module (see
Removing the Processor Module
).
Replacing the System Board
1.
Follow the procedures in
Before You Begin
.
2.
Replace the processor module (see
Replacing the Processor Module
).
3.
Replace the processor heat sink (see
Replacing the Processor Heat Sink
).
4.
Turn the system board over.
1
USB connector cable
2
AC adapter connector cable
3
display cable
4
optical drive board cable
5
connector latch
6
USB/audio cable
7
connector latch
8
microphone cable
9
speaker cable
1
screws (7)
2
connectors (5)
3
system board