Connecting and operating your storage system, Before you begin, Installing your rack-mounted storage system – Dell PowerVault 221S (SCSI) User Manual
Page 11
Connecting and Operating Your Storage System: Dell PowerVault 220S and 221S Systems Installation and Troubleshooting Guide
file:///C|/Users/rishi_sood/Desktop/220s/en/it/6f704c2a.htm[3/7/2013 12:07:19 PM]
Connecting and Operating Your Storage System
Dell™ PowerVault™ 220S and 221S Systems Installation and Troubleshooting Guide
Installing Your Rack-Mounted Storage System
Using Array Manager to Manage Your Storage System
Converting Your System From Tower-to-Rack or Rack-to-
Upgrading to a Redundant System
Cabling Your System for Joined-Bus, Split-Bus, or Cluster
This section provides procedures for connecting your storage system to a host system for each mode of operation: joined-
bus, split-bus, and cluster.
Before You Begin
Before connecting your storage system, ensure that the following are available:
The components that came with your storage system, including:
Power cord(s) and SCSI cable(s)
Resource CD
Drive carrier labels
Optional rail kit for rackmount systems
Your array management software CD that came with your Dell server
Relevant documentation:
Your system's User's Guide
Your system's Rack Installation Guide
Your Product Information document (for important safety, regulatory, and warranty information)
readme files included on your PowerVault system's Resource CD
If applicable, your rack-to-tower or tower-to-rack conversion kit documentation
Your array management software documentation
RAID controller and HBA documentation
#2 Phillips screwdriver
Installing Your Rack-Mounted Storage System
For information on how to install your Dell™ PowerVault™ 220S in a rack, see the Rack Installation Guide included with your
storage system.
Converting Your System From Tower-to-Rack or Rack-to- Tower