Canon BJ-30 User Manual
Page 134
126
Customizing the Printer
Chapter 8
When you set this FUNCTION to OFF, memory reserved for the input and
download buffers is used exclusively as an input buffer. No download
buffer is maintained under these conditions.
Set this FUNCTION to ON when you want some memory to be used as a
download buffer. Of the total amount of memory reserved for the input
and download buffers, 3 KB is allocated for an input buffer and the
remainder is used as a download buffer.
FUNCTION 10: Automatic line feed (LF)
Use this FUNCTION to determine the type of carriage return. When this
FUNCTION is OFF, the printer performs a normal carriage return (CR
only). When this FUNCTION is ON, the printer follows each carriage
return with a line feed (CR + LF).
FUNCTION 11: Automatic carriage return (CR)
When this setting is OFF, the printer performs a normal line feed (LF only).
Set this FUNCTION to ON if you want the printer to perform a carriage
return after each line feed (LF + CR).
FUNCTION 12: Alternate graphics mode (AGM)
Set this FUNCTION to ON to enable Alternate Graphics Mode (AGM).
In this mode, the printer accepts high-resolution, 24-dot, all-points-
addressable (APA) graphics commands similar to those used with
conventional 24-pin printers.
FUNCTION 14: Character set
When this setting is OFF, the printer uses Character Set 1. When this setting
is ON, the printer uses Character Set 2.
FUNCTION 15, 16, 17, 18: Code page
These FUNCTIONs allow you to select the following code page tables.
FUNCTION Settings
Code page/Character set
15
16
17
18
437 USA, English
OFF
OFF
OFF
OFF
850 Multilingual (Latin I)
OFF
OFF
OFF
ON
863 French Canadian
OFF
OFF
ON
OFF
865 Norwegian
OFF
OFF
ON
ON
860 Portuguese
OFF
ON
OFF
OFF
857 Turkish
OFF
ON
OFF
ON
855 Cyrillic
OFF
ON
ON
OFF
852 Slavic (Latin II)
OFF
ON
ON
ON
864 Arabic
ON
OFF
OFF
OFF
869 Greek
ON
OFF
OFF
ON