Canon BJ-30 - Manual (Page 139)

Chapter 9 Installing and Using the Battery Pack 131
Installing/Using
the Battery Pack
Chapter 9
Installing and Using the Battery Pack
This chapter describes how to install and use the battery pack that comes
with the Canon Portable Kit NK-300. You can purchase the Portable Kit as
an option for your BJ-30 Bubble Jet Printer. You can also purchase
additional battery packs (NiMH Battery Pack NB-300) to use with the
Portable Kit.
The Portable Kit, which allows you to operate the printer where AC power
is not available, includes the following:
Follow these guidelines to avoid damage to your printer or battery pack,
and harm to you or others:
❏ Before using a new battery pack, charge it as described later in this
chapter.
❏ Use only the Canon NB-300 rechargeable battery pack with the BJ-30.
❏ Do not attempt to disassemble a battery pack or the battery case.
❏ Follow local regulations when disposing of a used battery pack.
❏ Do not dispose of a battery pack where it may come in contact with fire.
❏ Keep foreign objects out of the battery compartment.
❏ Do not allow metal objects to touch the power connector on the battery
case or the terminals on the battery pack.
❏ Make sure the paper support is closed when you are not using the
printer. This turns off the battery switch.
❏ Recharge the battery pack only when it is fully discharged. Charging it
before it is fully discharged reduces the battery capacity.
❏ Remove the battery pack when you are storing the printer.
NiMH BATTERY PACK NB-300 BATTERY CASE