Dell U2414H Monitor - Manual (Page 31)

Setting Up the Monitor | 31
Removing the Cable Cover
1. Press the tab on the cable cover.
2. Remove the two tabs on the bottom part of the cable cover from the groove on the
back of the monitor.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable, flat table.
2. Remove the stand.
3. Use a Phillips crosshead screwdriver to remove the four screws securing the plastic
cover.
4. Attach the mounting bracket from the wall mounting kit to the monitor.