Dell 3007WFP-HC Monitor - Manual (Page 3)

Bottom View
Side View
1. Dell Soundbar mounting brackets — Attach the optional Dell Soundbar.
2. Security lock slot — Attach a lock to secure your monitor.
3. VESA mounting holes (100mm [Behind attached base plate]) — Use to mount the monitor.
4. Regulatory rating label — Lists the regulatory approvals.
5. Cable management hole — Organize cables by placing them through the hole.
6. Service tag label— Refer to this label if you need to contact Dell for technical support.
7. Barcode serial number label
8.
Lock down/release button — Push the monitor down, press the button to unlock the monitor, and then lift the
monitor to the desired height.
1. Power - Connect the power
2. Dell Soundbar power connector - Connect for the Soundbar (optional)
3. DVI connector - Connect your computer DVI cable
4.
USB upstream port - Connect the USB cable that came with your monitor to the monitor and the computer. Once this cable is connected you can use the
USB connectors on the side and bottom of the monitor.
5.
USB downstream port - Connect your USB devices. You can only use this port after you have connected the USB cable to the computer and USB upstream
port on the monitor.