Replacing the memory module(s), Procedure, Postrequisites – Dell Inspiron M431R (5435, Mid 2013) User Manual
Page 24
24
| Replacing
the
Memory
Module(s)
Replacing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the notch on the memory module with the tab on the
memory-module connector.
2
Slide the memory module firmly into the connector at a 45-degree angle
and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 22.
2
Replace the battery. See "Replacing the Battery" on page 13.
book.book Page 24 Wednesday, April 10, 2013 11:37 AM