Dell Inspiron 3500 User Manual
Page 113
PC Card Cage Removal: Dell™ Inspiron™ 3500 Portable Computer
The PC Card cage is supplied as a part of the system board assembly. However, if only the PC Card cage needs replacement, use this procedure to remove and
replace the PC Card cage. You do not need to remove the entire system board.
To remove the PC Card cage, see the exploded view of the
base assembly
and perform the following steps:
1. Remove the
display assembly
.
2. Remove the
keyboard
.
3. Remove the
palmrest assembly
.
4. Remove the
system board rails
.
5. Remove the
LVDS board
,
modem card
(if present), and
video board
.
6. Remove the four 14-mm screws securing the PC Card cage to the system board.
7. Remove the PC Card cage.
When you install the PC Card cage, ensure that the modem cable is routed correctly and is not pinched by the cage.
Type of Screw Torque
PNH 2 x 14 (4) 1.5–1.8 kgf-cm