Dell XPS 11 (9P33, Late 2013) - Manual (Page 33)

Replacing the Palm-Rest Assembly | 33
Replacing the Palm-Rest Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 5. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 7.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the display hinges with the screw holes on the
palm-rest assembly.
2 Replace the screws that secure the display hinges to the palm-rest assembly.
3 Turn the computer over.
4 Rotate the palm-rest assembly to an angle of 180 degrees.
Postrequisites
1 Replace the system board. See "Replacing the System Board" on page 30.
2 Replace the fan. See "Replacing the Fan" on page 18.
3 Replace the mSATA card. See "Replacing the mSATA Card" on page 16.
4 Replace the battery. See "Replacing the Battery" on page 12.
5 Replace the base cover. See "Replacing the Base Cover" on page 10.